Table of Contents
Advertisement
1CVA147C
RF Output Adapter
VH54 Cable Transformer
This RF output adapter is used with a
coaxial RF cable, such as VH82 or VH90,
to connect your camcorder
to a standard
TV (one without audio/video
inputs) for
playback.
If your antenna cable is the flat
twin-le_id type attached
by two screws,
you need a 300-to-75
ohm transformer.
If
your TV has 300 ohm antenna screw
terminals,
you need an optional 75-to-300
ohm transformer
such as VH54.
Coaxial
RF Cables
VH82(6-ft)
VH90(12-ft)
This 75-to-300
ohm transformer
is used to
connect a standard 75-ohm antenna cable
(such as VH82 or VH90) to the 300 ohm
screw terminals
on a TV.
VH83 Audio/Video
Cable
This six foot audio/video
cable can be
used to connect the camcorder
to a TV
monitor or VCR for tape playback
or
copying tapes.
AH25 Y-Adapter
These RF cables are used with the RF
output adapter to connect your camcorder
to a standard TV (one without audio/video
input jacks) for playback.
If your TV has
300 ohm antenna screw terminals,
you
will need an optional 75-to-300
ohm
transformer
such as VH54.
If your
antenna cable is the flat twin-lead
type
attached by two screws, you need an
optional 300-to-75
ohm transformer.
This Y-adapter allows you to Connect your
camcorder's
mono audio cable to a stereo
TV or VCR.
74
Advertisement
Table of Contents
