Table of Contents
Advertisement
Use the Battery
to Power
Your Camcorder
(continued)
Marks
To AC Wall
Outlet 100-
240 Volts,
50/60 Hz.
CHG
(Charge)
REFRESH
• Indicator
Adapter/Charger
Button
Charge the Battery
If the DC cable is attached to the DC OUT
jack on the adapter/charger,
remove it.
1. Align reference
mark on battery with
mark on adapter/charger.
2. Hold the battery flush against the
adapter/charger
and slide it in the
direction of the arrow.
3. Plug adapter/charger into nearest AC
outlet (100-240V,
50/60Hz).
4. If the battery is properly connected,
the CHG indicator flashes.
Note:
If you try to charge a battery that
has not been charged for a long period of
time, it may take a few minutes for the
CHG indicator
to flash.
.
o
.
After the battery is charged, the CHG
indicator
stops flashing and lights.
Remove
the charged battery by sliding
it office
adapter/charger.
Attach'the
charged battery to the
Camcorder.
Use the REFRESH
Button
The battery provides
increased
operation time if you "refresh"
it after
five chargings.
The, refresh feature
"refreshes"
the battery by completely
discharging
it.
1. Attach battery to adapter/charger.
2. Press REFRESH.
The REFRESH
indicator lights and the battery
begins discharging.
3. When discharging
is completed,
the
REFRESH
indicator turns off, and
the CHG indicator flashes.
The
battery now charges.
4. After the battery is charged, the
CHG (charge) indicator stops
flashing and lights.
5. Remove the battery from the
adapter/charger.
14
Advertisement
Table of Contents
