Advertisement
Before attempting
to operate your
]'emote control, install the batteries
as shown here.
The remote control
produces
an
invisible (infrared)
beam that travels
in a straight line much like the beam
of a flashlight.
For this reason,
when olJerating
the remote control,
you must point it directly
at the front
of the TV without
objects between
that can block the infrared
light
beam.
Your remote control is designed
to
be very rugged and will withstand
a
considerable
drop.
If it receives
an
extreme blow, the case is designed
to slightly separate
at the seam
rather than fracture.
If this happens,
simply squeeze
the case cohere it
separated
until it snaps back
together.
The operation
of the
remote will probably
not be affected.
--Installing/Replacing
Batteries
1. Turn the remote control face
down.
2. Press down on the ridged area of
the battery cover and slide it off.
3.
Install four "AAA" batteries
in the
battery compartment
as shown.
Make sure you insert the negative
(-) end of each battery first.
4. Replace the cover and turn remote
over-face up.
Notes:
Never place anything
heavy on top of
the remote control
or lay it upside-
down.
This may accidentally
depress
the buttons
for a long dine and
discharge
the batteries.
Replace the batteries when the TV fails
to respond to the remote control.
If yot_ programmed your remote to
control other components, you may
have to reprogram the code numbers
when you change the batteries. Try not
to press any buttons while changing
batteries.
7
Advertisement
