Advertisement
;-VIDEO
•
CAUTION
TO AVOID
DAMAGE:
1. DO NOT CONNECT
SPEAKER
OUTPUT
TO A SEPARATE
AMPUFIER
OR
TO SPEAKERS
CONNECTEO
TO
ANOTHER
PRODUCT.
2. DO NOT CONNECT
LEFT AND
RIGHT
SPEAKER
OUTPUTS
TOGETHER.
(_CABLE/ANTENNA
Connectors-used
when attaching a
home antenna and/or a cable-TV system to your TV.
Connection details are on pages 30-32.
Q
EXTERNAL SPEAKERS Terminals-permit direct
connection of auxiliary speakers. Connection details are
on pages 43.
(_SPEAKER
Switch-when you connect additional speakers
to the EXTERNAL SPEAKERS terminals on the TV this
switch lets you optimize the sound for the speaker location
you choose.
• If you place the speakers on each side of the TV, put
switch in EXTposition.
The internal audio from the TV's
speakers will be muted.
• If you place the speakers behind the viewer (at the back
of the room), put switch in INT/EXTSURR
position.
This maintains normal volume of the TV's internal
speakers and a surround signal to rear speakers.
• Details about connecting speakers to the TV are on
pages 43.
IMPORTANT:
Always place switch in INT/EXTSURR
position if no external speakers are used (or if external
speakers are ever disconnected).
@@
@@
@@
SELECT
OUT Jacks-provide
fixed-level
audio and
video output from whatew,_r is displayed
on the TV
screen (except signal from S-VIDEO
connector).
Provide
audio and video signals suitable for recording.
Can be used for several applications such as:
• VCR editing with two or three VCRs (page 36).
• recording
TV programs onto a camcorder (page 39).
• recording
cable-TV
programs onto a VCR that is not
cable-ready (page 36).
• recording
audio onto an audio cassette tape recorder
(page 4 I).
Notes:
• Remember that the signal coming out of these jacks is
whatever you see (and/or hear) on the TV screen. So,
whatever you want to record must be displayed on the TV
screen during recording. Menus, status displays, and special
effects such as picture-in-picture and channel guide will not
appear in the recording.
• Video signals from S-VIDEO connector can not be recorded
from the SELECT OUT VIDEO jack. To record from an
S-VHS component connected to the S-VIDEO connector, you
must also connect the video cable to the VIDEO INPUT I jack
and then select channel 91 on the TV screen.
INPUT
2 Jacks-provide
for direct connection
of video
devices (like VCRs) or compatible
home computers and
TV games with audio/video
outputs.
To see the signals
from a device that is connected
to the INPUT 2 jacks,
tune your TV to channel 92.
INPUT 1 Jacks-provide far direct connection of video
devices (like VCRs) or compatible home computers and
TV games with video/audio outputs. To see the signals
from a device that is connected to the INPUT I jacks,
tune your TV to channel 9 I.
Q
S-VIDEO Connector-provides
for direct S-VHS video
connection from S-VHS VCR or camcorder.
Remember to also connect the S-VHS VCR's or
camcorder's audio jack(s)Io the TV's INPUT 1 LEFT
and/or R/MONO audio jacks. This is necessary because
S-Video cables only carry _:hesuper video (picture), not
the audio signal. Connection details are on pages 36
and 39.
Signals from S-VHS devices connected to the TV's
S-VIDEO connector and INPUT I audio jack(s) can be
viewed by pressing the TV button followed by 9 then 0
on the remote control-(or by scanning to TV channel 90
if you have added "90" to channel memory as described
on page 22).
Note: Ifyou want to use the ";ELECTOUTjacks, remember to
also connect the S-VHS comlconent'sregular video cable to the
VIDEO INPUT I jack, and then tune to channel 91.
(_HI
FI OUT Jacks-feed vc,lume-controlled stereo audio
out from whatever is displayed on the TV screen. Allow
connection of audio amplifier and let you adjust sound
level with TV's remote. Connection details.are on page 41.
29
Advertisement
