Advertisement
Standard
VHS VCR (Not S-VHS)
(These connections allow you to record TV programs and play back tapes.)
Preferred
Method
(for areas with good reception)_
.J
Coaxial Antenna Cables**
(such as RCA #AH065G)
** These optional accessories
(one AH047-2-way
splitter, two
AH065G-antenna
cables, and one
AH077G-audio/video
cable) are
available as a kit under #AVH500.
2-Way Signal Splitter**
(such as RCA #AH047)
Back of VCR
Shown here is the preferred method of connecting a VCR to
your TV. This method uses a 2-way signal splitter to run
separate signals to the VCR and TV. This way you can view
either TV programs or VCR tapes and not be concerned about
the position of the VCR's TV/VCR switch. If your cable
company requires a decoder box for premium channels, refer to
page 32.
Note: When connected this way, the audio/video connections from the
VCR to the TV are required for picture-in-picture viewing and for you
to watch tapes being played by the VCR.
Simplified
Method
Back of TV
Incoming
Cable
Back of VCR
O_
TO TV
Shown here is a simplified method of connecting a VCR to your
TV. If your cable company requires a decoder box for premium
channels, refer to page 32.
Note: The audio/video connections from the VCR to the TV are
required for picture-in-picture
viewing and for stereo playback from
stere() VCR's.
* Optional accessories are available from most RCA dealers and
electronics supply stores.
Operation:
• If the VCR is connected to INPUT 1jacks as shown, select
channel 91 on the TV to view whatever the VCR is playing.
• If you connect a second audio/video device to INPUT 2, select
channel 92 on the TV to view whatever the second device is
playing.
Note: Youcan program your TV to automatically select the proper VCR
inputchannel (91 or 92) when you press the VCRI or VCR2button.
Details are on page 24.
AUmO
@-@
HI-F}
OUT
SELECT
OUT
Coaxial Antenna Cable*
(such as RCA #AH037)
Operation:
• If the VCR is connected to INPUT ! jacks as shown, select
channel 91 on the TV to view whatever the VCR is playing.
• If you connect a second audio/video device to INPUT 2, select
channel 92 on the TV to view whatever the second device is
playing.
Note: Youcan programyour TV to automaticallyselect the proper VCR
input channel (91 or 92) when you pres:;the VCRI or VCR2button.
Details are on page 24.
35
Advertisement
