Advertisement
Follow one of these steps to connect
a cable-TV
system to your TV instead of a home antenna.
SincE: cable-TV
systems
vary, you may wishto
consult your local cable-TV
company
for additional
information.
You can connect the cable-TV system to either ANTA or ANT B as explained on page 23.
A
Follow this diagram if your cable company does not require a converter/decoder
box (no scrambled channels):
CABL_ANTENNA
ANTA
Incoming
/._
Cable
ANT B
CONVERTER
BACK
OF TV
B
Follow this diagram if your cable company requires a converter/decoder
box that can be controlled by remote control.
Most brands of remote-controllable
boxes can be controlled by the remote that came packed with your TV.
Details for programming your TV's remote to also control the converter/decoder box are on page 33.
See diagram D if you want to connect a VCR.
Remember to tune your TV to the
output channel of the converter box
I
(usually 2, 3, or 4) when selecting
oo_
channels via the converter box.
CONVERTER/DECODER
BOX
CABLE/ANTENNA
ANTA
ANT B
CONVERTER
BACK
OF TV
C
Follow this diagram if your cable company requires a converter/decoder box that cannot be controlled by remote control.
Scrambled' Cable-TV
Channels
Some cable-TV decoders require that you manually switch
from regular to scrambled channe!s on the decoder
whenever you wish to view the premium pay channels.
By connecting the decoder to the ANTA input and
CONVERTER output on the TV as shown here, you can
switch between the scrambled and unscrambled channels
using the remote control.
To change the incoming signal from ANTA to ANT B,
simply press the ANT (Antenna) button on the remote. Each
time you press the ANT button, the channel numbers will
change color on.the screen tO show which antenna signal
you are watching.
* Optional accessories are available from most RCA dealers and
electronics supply stores.
Incoming
Cable
(Converter/Decoder)
BACK
_
,-_
o:=0
II
/ll
Coaxial Antenna Cables*
Nonscrambled cable channels will come thru the ANT B input
whenever the channel numbers are yellow. The scrambled
channel from the decoder box will come thru the ANTA input
whenever the channel numbers are blue. Be sure to leave the
decoder box set to the scrambled channel, and remember to
tune your TV to the output channel of the converter box
(usually 2, 3, or 4).
31
Advertisement
