Advertisement
Thechannel guide feature l etsyou
display astillpicture
of several
channels at the same time so you can
,auickly review what programs are
available.
Note:
Channels2-13
were programmed
into the channel memory at the factory.
These are the channels that will appear
during channel guide unless you
autoprogram
the channel memory or add
and erase channels as described on
page 22.
ZOOM Buttons
PIP
OFF
SWAP
©
©
CHAN GUIDE Button
-Starting
Channel
Guide
(with remote only)
To start channel guide, press the
CHAN GUIDE button.
Note: The remote control must be in the
"TV Mode". Pressing the TV button puts it
in the "TV Mode".
• "i?hescreen will display all the
channels that are programmed
into
channel memory, 12 at a time.
• Each little screen will display a stop-
action picture that will be
continuously
updated.
• While the 12 channels are on the
screen, you can use the ZOOM button
to enlargethe
picture and then use the
•arrow buttons to move around the
screen. To return to normal size, press
OUT.
Note: When using the ZOOM feature,
you will see a mosaic pattern as the
picture is made larger.
• To select one of the channels being
displayed in the channel guide, press
the twc, corresponding
number
buttons for that channel.
-Stopping
Channel Guide
• To select one of the channels being
displayed in the channel guide, press
the two correspon.ding number
buttons for that channel. That will
stop channel guide and take you
directly to the channel you selected.
• Another way to stop channel guide
is to press CHAN GUIDE. The little
screens will disappear, and the TV
will return to the original channel
you were watching.
12
Advertisement
