To Adjust The Sound Volume; Watching A Movie Disc- Theater Mode - Pioneer LaserDisc CLD-D704 Operating Instructions Manual

TO ADJUST THE SOUND VOLUME - Digital
Level Control
LD/CDV/CD
The SHUTTLE ring on the front panel or remote control unit
can be used to lower sound volume by up to -25 dB.
By rotating the ring to the right, the reduced sound volume can
be returned to the 0 dB setting.
• The same kind of setting can be performed when using
headphones.
• The modified sound level automatically returns to the 0 dB
default setting when the power is turned off.
• Only digital recorded audio can be adjusted using this
method; analog audio recorded on LDs cannot be adjusted
in this way.
• Sound volume control cannot be effected at the digital
output connectors.
• When the digital audio level has been lowered using this
control, pressing the AUDIO button to listen to analog
audio will cause the sound level to rise suddenly. Be
careful.
1 Press D-LEVEL CTRL on the remote control unit.
• The control level will be indicated on the screen.
D-LEVEL
[_ CTRL
2 Rotate the SHUTrLE ring to the left.
• The sound volume will be reduced.
• To return the sound level to its original setting, rotate the
dial to the right.
Front panel Remote control unit
Q QQ
®_ e J
I L ,I
Shuttle ring
[
Output Level
I I II I' "0" . ....... ...... 15de
To cancel the digital audio volume function:
Press the D-LEVEL CTRL button again.
LD
WATCHING A MOVIE DISC- FILMMODE
Press FILM MODE on the front panel.
\L/
o
MODE
The FILM MODE indicator will light.
Set to ON in accordance with your tastes, particularly when
viewing movie discs.
When the film mode is ON:
• The display in the front panel display window turns off (can
be turned on/off using the FL OFF button).
• The screen display (see pages 38 and 39) does not function.
• The screen is blacked (blanked) while changing disc sides.
• The TOC is not read, in order to shorten the side-changing
time as much as possible. As a result, random playback,
and edit playback cannot be performed, even when the
discs contain TOC codes. In addition, the remaining time,
ABS time and total time displays will not function. (These
displays will function normally if the disc is played back
once before us_r_g the f_m mode.)
NOTE:
When the film mode is ON, the display in the front panel
display window will not appear even when the power is
turned on. In addition, the player memorizes the ON/OFF
condition of the film mode even if the power is turned off, so
the display will remain off the next time the
power is turned
on. To turn the display on again, press FL OFF.
23
<VRB1142>