To Adjust The Picture Quality (V-Dnr); Remote Control Unit - Pioneer LaserDisc CLD-D704 Operating Instructions Manual

TO ADJUST THE PICTURE QUALITY (V-DNR)
I
When an LD disc is played back, noise or color distortion may
appear on the screen. The Video-Digital NR system (V-DNR)
reduces noise or color distortion. Luminance (brightness) and
saturation (color) are adjusted respectively, as your preference.
Selecting the V-DNR mode
• You can select the disired V-DNR mode (STANDARD,
VARIABLE or V-DNR OFF) with the STANDARD button,
the VARIABLE button and the V-DNR OFF button on the
front panel, or with the V-DNR button on the remote control
unit. (Pressing the V-DNR button changes the mode
circularly.)
STANDARD:
V-DNR turns on in the standard (recommended) setting.
i'm V-DNR
STANDARD
©
The V-DNR settings appear on the
screen for about 2 seconds.
VARIABLE:
The noise reduction effect on color can be adjusted with
the JQG dial, and the noise reduction effect on brightness
can be adjusted with the SHUI-ILE ring. Adjust them as
your preference (10 ste )s variable).
V-DNR
VARIABLE
©
V ONR Va_ ba ble
Y M i n nlllllllli-,.Max
C MtnBmmm: .... Max
The " : " position on the display
indicates the STANDARD setting.
The display goes off when the JOG dial or SHUTTLE ring
is not operated for about 5 seconds. (Even when the
display goes off, the setting still remains, but cannot be
adjusted.)
V-DNR OFF:
V-DNR turns off.
V-DNR OFF
©
V-DNR OFF
The display appears on the
screen for about 2 seconds.
J
NOTE:
• When the power is turned on after connecting the power
cord, the V-DNR mode is set to the STANDARD mode.
• The selected mode and settings are stored in the player's
memory while the power cord is connected.
• When the V-DNR button on the remote control unit is
pressed once, the last selected mode is displayed on the
screen for about 2 seconds. To change the V-DNR mode to
the next one, press the V-DNR button while the mode is
displayed.
• V-DNR mode can be set oradjusted even when the player
is not inplayback mode. However, you can check the result
only when the image appears on the screen.
• The noise reduction effect maybe difficult to see depending
on the discs or scenes.
_Ecr _ D_sc _ DE
oigi,,,m..,o.yeom_
@ Q Q
.... _
SHUTTLE ring JOG dial
V-DNR r STANDARD--_ VARIABLE1
V-DNR OFF <
SHU'n-LE ring
JOG dial
ON
Press the JOG MODE button
to ON and then turn the JOG
dial to adjust the color level.
24
<VRB1142>