To Repeat Playback (Repeat Play); To Choose Random Selection Of The Playback Order; Random Play); To Insert A Three-Second Interval Between Tracks - Pioneer PD-7500 Operating Instructions Manual

VARIOUS OPERATIONS
@ To change the playback point, press HI-LITE SCAN button ©
at the desired point while in playback mode, and ten seconds
of each subsequent track will be played back from the chosen
point.
To repeat playback {repeat play)
REPEAT
®@ Press REPEAT button @.
When pressed once, a single track will be repeated.
When pressed twice, all tracks will be repeated.
In the all-track repeat mode, programmed play, random play and
programmed random play, hi-lite scan will be repeated.
To choose random selection of the playback order
{random play)
® Press RANDOM PLAY button @.
When all tracks of the loaded disc have been played, playback
will automatically stop.
lf specific tracks have been programmed, only those
programmed tracks will be played. (Program random play.)
To insert a three-second interval between tracks
when recording to cassette tape
® Press AUTO SPACE button @, When this is done, a silent three-
second interval will be recorded automatically between tracks,
thus assuring that the music search function operates correctly.
The auto space function can be used during repeat play, ran-
dom play and programmed play as well.
12
<PRB1127>
En
Adjusting the sound volume
OUTPUT LEVEL
Cai]
fd
When the ''—"" side is pressed, the sound volume will be decreased
by a small amount; when the ''+'' is pressed, sound volume will
be increased by the same amount.
®@ The sound volume can be adjusted within the range OdB to
— 25d0B.
4)
Ta