To Play An Ld, Cdv Or Cd - Pioneer LaserDisc CLD-D704 Operating Instructions Manual

TO PLAY AN LD, CDV OR CD
I
2
l l
I, ,!
Z FL OFF
3
DISC SIDE A
- DISC SIDE B
5
1
Turn on the power to the
monitor TV and/or audio
system.
When a stereo system is used
for audio listening:
Turn on the power of the amplifier,
and set its input selector to the pro per
position for listening to the player,
such as "LD".
2
Turn on the power to this unit.
POWER
STANDBY/ON
or
POWER
D
3
Open the disc table.
or
EJECT
TIPS:
If & on the front panel is pressed in
the STANDBY mode, the power is
automatically turned on and the disc
table is opened.
State of the display window during playback:
ITI ITI iTI _¢-
Chapter number
21,_ D 9 _ LD
L J
Time number (minutes/seconds or
minutes only) or Frame number
- CD
Track number Elapsed play time of current
track (minutes/seconds)
<VRB1142>
To specify and play a single side (side A or side B)
To play side A only, press DISC SIDE A instead of D,-/_,-t.<. S ide A will
be played and then playback will stop.
To play side B only, press DISC SIDE B instead of _-/_I<. Side B will
be played and then playback will stop.
State of the display window during Gamma-turn:
• During switching from side A to side B
• During switching from side B to side A
TIPS:
While switching the side, a still picture appears on the screen and
" :.-_-__" or " _--3 " in the display window blinks.