IM÷nu
Audio
Digital
Output
Mode
If you connected youl DVD iecorder to a ieceiver via the [)IGI]_L
AUDIO
OUT jack on the back
of the player, choose the type of ieceiver (or decoder) signal you have.
PCM
Provides convelted
(2D-quality stereo. You would use this setting if you didn't have a
DTS or Dolby Digital compatible
receiver.
RAW
Provides the original muki channel digital audio signal f_r use with D'IS or Dolby
Digital compatible receivers.
Note:
If you're
using
a DT5 or Dolby
Digital
receiver
with
the digital
audio
coaxial
connection,
make
sure you set the Digital
Output
Mode
to RAW,
otherwise
you
won't
hear any sound,
Dynamic Range Control
Phis f_'atureallows ,you to even out the rob=me dining playback.
On ]'his setting cuts down the volume dynamics when you want to watch a program oi movie
at night without
disturbing an)x)ne.
Off Dynamic Range Control is offand
tile volume dynamics are set to normaL
TV Channel
Menu
You can scan all available' ci]anncis and edit ti]cm in the-TV (_hannel menu.
The TV Channel
menu,
with
Auto
Scan selected.
The Schedule
menu,
with
a timer
recording
schedule
set up.
Auto
Scan
Highlight the Auto Scan icon and press OK. Choose the type of signal yotl have (antenna or cable)
and press OK. The unit searches for all available chamlels.
-[b add or Jemoxe channds fi:om the channel list, highlight the Skip Item icon at the bottom of
the screen and press OK. "lhe Skip icon is added or removed horn the channel in the channel
list. If you remove a channel flora the channel list, you can still access it by using the numbei
buttons on the remote.
-[b exit at any time, highlight the ['xit icon and p_ess OK.
Schedule
Menu
(Timer
Recording)
-timer lecordings ai_ explained in detail on pag__23.
34
Graphics contained within this publication are for representation only
Need help?
Do you have a question about the DRC8052NB and is the answer not in the manual?
Questions and answers