RCA DRC8052NB User Manual page 2

l+++@P++++++
This symbol indicates that this product incorporates double
insulation between hazardous mains voltage and user
[_--_ accessible parts¸
"Ihis symbol indicates "dangerous
vokage" inside the product that
presents a risk of elecuic sho& or
petsonal hljur>
rIhis symbol indicates
important into uctions
accompanying the product.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device.
pursuant to Part IS of the FCC rules+These limits are designed to provide reasonable protection
against harmful interference in a residential installation,This equipment generates, uses and can radiate
!_dio frequency energy and, if not installed and used in accordance with the instructions,may cause
harmful interference to radio communications However;there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to Imdio
or television reception, which can be determined by turning the equipment off and on. the user is
encouraged to try to corpect the interference by one or more of the following measures
• Reorient or relocate the receiving antenna.
• Increase the separation between tile equipment and receiven
• Connect this equipment into an oudet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment
Regulations.This class Bdigital apparatus complies with Canadian CES-003.
Cet appareil num4rique de la class Best conforme a la norme du NHB-003 du Canada.
Refer to the identification/rating label located on the bad< panel of your product for its proper
operating voltage.
Product Registration
Please fill out the product legistration cald and return it immediately. Returning the product registration
card allows us to contact you if needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase.Attach it here and
record the serial and model numbers in case you need them.The numbers are located on the bad<of the
DVD Recordel:
Hodel No+
PurchaseDate:
Serial No.
Dealer]AddresdPhone:
WARNING
To reduce the risk of fire or shock hazard, do not expose
this DVD Recorder to rain or moisture.
CAUTION
THISPRODUCT UTILIZESALASER. USEOF
CONTROLSORADJUSTHENTSOR PERFORHANCE
OF PROCEDURES OTHERTHANTHOSE SPECIFIED
HEREINHAY RESULT IN HAZARDOUS RADIATION
EXPOSURE DO NOT OPEN COVERSAND DO NOT
REPAIRYOURSELE REFER SERVICINGTOQUALIFIED
PERSONNEL
CAUTION
FCC Regulations state that unauthorized changes or
modifications to this equipment may void the user's
authority m operate it.
Note:
This DVD Recorder is designed and manufactured to
respond to the Region Hanagement Information. Ifthe
Region number of a DVD disc does not correspond to the
Region number of this DVD Recorder this DVD Recorder
cannot play the disc.The Region number for this DVD
Recorder is Region No I.
Note:
This device is protected by U.S.patent numbers 4.631,603
and 4,577,216 and 4,819.098 and other intellectual property
rights.The use of Macrovision's copy protection technology
in the device must be authorized by Hacrovision and is
intended for home and other limited pay-per-viewuses only.
unless otherwise authorized in writing by Hacrovision
Reverse engineering or disassembly is prohibited.
The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids,such as vases, shall be
placed on the apparatus.
IMPORTANT: The power cord can be
unplugged to turn off the main power to the
unit, It should also be easily accessible in an
emergency.
Ventilation:
You must adequately ventilate the product. Hake sine thepe is adequate space around the DVD
Recorder to provide proper air flow for ventilation See diagram.
I+he AC power cord is polarized (cme blade is wider than the other) and
only fits into AC ou dets one wa> If the plug won't go into the outlet
completdy, rain the plug over and try to insert it the other wa): If it
still won't I_t. contact a qualified electrician to change the oudet or use a
dirks'rent one+ Do not attempt to bypass this safety feature.
CLASS1 1
LASER
PRODUCT