Recording From A Dv Camcorder - RCA DRC8052NB User Manual

-[b suspend a timer recmding for a later time, highlight the Hand icon and press OK. The timeJ recording shows Suspend in the list under the Seams
cohmm "Io unsuspend a recolding, highlight and select the Hand icon again.
Note: If a recording fails, you can highlight and select the Hand icon to display the reason why the recording failed.
-[b delete" a thner recoJding, highlight die rIi:ashcan icon and pi_-ss OK.
-[b exit at any time, highlight the [xit icon and press OK.
Note: If you use a cable box, the cable box must be On and tuned to the channel you want to record, during the timer recording; if
you're recording from satellite, the satellite receiver must be On and tuned to the channel you want to record.
Watching one channel while you record another channel (cable with no cable box
or off-air antenna only)
If you want to watch another channel while you;re recoiding, you need to make sure 7,_m'veconnected an RF coaxial cable to the ANTENNA/CABLE
OUTPUT jack on DVD recordeJ and "I'V'_ con:esponding Cable/Antenna Input jack.
1. Make sure tile DVD recorder and the "I%' are oil. "Iune tile TV to the appJopriate Video Input Channd (if you need help, go to page 20).
2. Using the DVD _ecmdel's channel btlttons, tune to the plogram Toil want to retold. PJess tile RECORD button.
3. Use the TVk remote connol to change the channels on the -PM
4. When yotl?re finished recording, remember to mm the TV back to its Video Input Channel and watch TV through the DVD recorder.
Notes:
Thisfeature might work differently ifyou receive programming viaa cablebox (adifferent c onnectionmay be required, See page 10
for more information), If you receive programming via a satellite receiver or digital cable box, this feature isn't available--you can't
record one satellite or digital cable program and watch another satellite or digital cable program.
Recording from a DV Camcorder
1. -Ibm oil the" DVD recordel and youl camcoI&_L
2. Insert a compatible disc you want to use fo_ the recording.
3. Connect the DV camcordeJ to the recorder's DV IN jack on the flont of the mlit using a Mini DV cable.
4. Press die INPU-[ button on the remote tlntil tile DV input appea_s and press OK.
5. Find the part of the tape yotl want to record rising tile PLAY, PAUSE, FWD/REV, and STOP buttons oil the remote. It will also control you
camcordv_r.
6. Press RE( to start tecoldblg. You can also press REC repeatedly to set the time with Express R_'colding.
7. When finished, press STOP to stop recording.
Recording from a VCR
1. -Ibm on dlc DVD recoidel and youl VCR.
2. Insert a compatible disc ycm want to use for tile recoJding.
3. Connect the VCR to tile lecol'der's AV IN jacks DV IN iack on the flont of the unit using a Mini DV cable.
4. Press the INPUT button on tile remote lmtil the DV input appeaJs and press OK.
5. Find the part of the tape you want to record using the PLAY, PAUSE, FWD/RFS, and STOP buttons oil the remote. It will also control you
camcor&_r.
6. Press REC to start recolding. _%u can also press REC repeatedly to set the time with Express R_'colding.
7. When finished, press STOP to stop recording.
24
Graphics contained within this publication are for representation only