Mitsubishi Electric 3D DLP 742 series Owner's Manual page 25

2. TV Menus 25
Picture, continued
>
Source
Format
Glasses
Emitter
mnternam
Glasses
Emitter
E×ternam
Depth
DLP Link
3D Mode
Off
Automatic
Side-by-Side
Top/bottom
Checkerboard
2D+ Depth
Standard,
Reverse, Off
Standard,
Reverse
Standard,
Reverse, Off
Overrides the 3D processing of any HDMR 1.4amcompBiant 3D signaB and dis=
pBaysthe signaB in 2D instead.
AHows access to some of the 2D picture adjustments that are hidden when the
TV's 3D mode is set to Automatic.
When the TV receives a 3D signaB from an HDMR 1.4amcompBiant device or from
VUDU 3D, forces the TV automatically into 3D mode and seBects the correct
3D format.
When the TV receives a normaB 2D signaB, makes the TV automatically exit 3D
mode.
Not effective with checkerboard 3D. Manually select Checkerboard or
another mode when needed.
3D format choices for use with 3D signals that are not HDMI 1.4a compliant.
When the TV receives a 3D signal that is not HDMI 1.4a compliant, you
must manually select a 3D format here based on the type of 3D signal being
received.
Return the TV to Automatic or Off at the end of the nomcompliant 3D
program.
If an HDMI 1.4a compliant signal is received, the TV will automatically override
any manual 3D selection.
When active, generates a simulated 3D image from an ordinary 2D signal.
For use with the TV's internal emitters.
Select the Off setting if you notice IR interfeF
ence with other devices.
For use with an external emitter connected to the
TV's 3D GLASSES EMmTTER jack.
Use the Standard or
Reverse setting to synchro=
nizes left/right images to
work with your 3D glasses.
Available only when Source Format is set to 2D+ Depth.
Highlight the icon and press ENTER to display the adjustment screen.
Allows adjustment of the 3D effect from a flatter image to one with more depth.
® For use with DLP Link.
Select the Off setting if you are not using DLP
Link glasses.
Use the Standard or
Reverse setting to synchro=
nizes left/right images to
work with your 3D glasses.
Notice Concerning Format OompatibiUity
The Mitsubishi TVs will support the mandatory HDMI
1.4a 3D signals intended for the United States. Spe=
cifically, the TVs will support the 3D signals known as
Frame Packing 1080p@24 Hz and 720p@60 Hz (primar=
ily from Blu=ray players and gaming consoles), Side=
by=Side(Half) 1080p@24/30/60 Hz, 1080i@60 Hz, and
720p@60 Hz, Top=and=Bottom 1080p@24/30/60 Hz
and 720p@60 Hz, and Checkerboard 1080p@60 Hz.
However, there may be some 3D sources that are not
compatible with the TVs. In all cases: (1) 3D sources
must connect to the TVs using the HDMI inputs or via
StreamTV
TM
Internet Media; and (2) Active Shutter 3D
glasses that match the TV's internal synchronization
emitter, or Active Shutter 3D glasses with their own
external matching synchronization emitter connected to
the rear of the TV or DLP Link Active Shutter 3D glasses
are required in order to view 3D content.
For assistance ca((1(800) 332-2119