Sound - Mitsubishi Electric 3D DLP 742 series Owner's Manual

26 2. TV Menus
Sound
>
Audio
Settings in this menu are saved for the current input only with the exception of Bamance and
TV Speakers, which applies to all inputs. Press _( _ to make changes and then press MENUto
return to the menu screen.
To make Audio adjustments while watching TV and without using the menu:
1. Press the AUDI0key.
2. Press _ V to select an audio option.
3o Press 4 )_ to change the setting.
TV Speakers On Turns on the internal TV speakers.
Off
Center
Turns off the internal TV speakers so you hear sound only from a connected AiV receiver.
Note: When you disconnect an A/V receiver, be sure to change the Sound setting
to TV to hear sound from the TV speakers.
842 Series. Makes the TV's speaker array act as a center channel. See "Using the
TV Speakers as a Center Channel," page 16.
Notes:
When Center is active, the subwoofer output is muted even if set to On.
Center
Bass
Subwoofer
Trebme
Bamance
Sound Mode
LevemSound
Listen To
(applies only
to analog
channels from
the ANT input)
[Center channel 842 Series. Adjusts the volume level of the TV speaker array when used as a
level adjustment] center channel.
Note: Set TV Speakers to Center to make this adjustment available.
Controls volume of low-pitched sound from the TV speakers.
[Subwoofer level 842 Series. Adjusts the volume level of a connected subwoofer.
adjustment] Note: Set Sound > Global > Subwoofer to On to make this adjustment available.
Controls volume of high-pitched sound from the TV speakers.
Controls audio balance between the right and left TV speakers.
Stereo No special audio effects from the TV speakers.
Surround Modifies audio from the TV speakers.
For monaural (non-stereo) programs, creates a simulated stereo effect.
For stereo programs, creates a simulated surround sound effect.
The TV's speaker array plays surround sound if available.
Music 842 Series. Optimizes the TV's speaker array for music listening.
Night 842 Series. Focuses the TV's speaker array to a single point to limit sound heard by
others outside the room. Press ENTER to adjust the focal point (Night Angme).
On, Off Reduces differences in sound volume between programming segments, such as the
difference between regular broadcast programs and commercial segments.
Stereo The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word
Stereo is displayed when you tune to a channel broadcasting in stereo.
Mono Reduces background noise. Use when receiving a weak stereo audio signal. All
audio is played as mono.
SAP Selects an additional monaural sound track not audible during normal TV viewing.
(Second Audio The SAP signal might be related to the program (such as a sound track in a foreign
Program) language), or it might be unrelated (such as a weather report). If an SAP signal is
broadcast, the letters SAP are displayed when you tune to the channel.
For assistance ca((1(800) 332-2119