Table of Contents
Advertisement
correcting programming e rrors
If, after programming,
you forget to load a tape, or load a tape
with its erasure
tab remow_.d, then the programmed
recording
light and the tape status
s_Tnbol will flash. A tape without
an
erasure
tab WIU be ejected. To correct this, load a tape with its
erasure
tab intact,
and turn off the VCR.
memorybackup
If the VCR is without
power for 30 seconcts or less, it will retain
the time and the programmed
settings,
provided
the VCR has
been plugged
in for at least an hour beforehand.
If the power is
out for more than
30 seconds, the time arid the progranxmed
settings
will be lost.
45
Advertisement
Table of Contents
