Download Print this page

Maytag 3RMED4905TW0 Use & Care Manual page 19

Electric
Hide thumbs Also See for 3RMED4905TW0:

Advertisement

Available languages

Available languages

As needed
cleaning
laundry
detergent
and fabric softener
residue
call build
up on the lint screen. This buildup
can cause longer drying
times for your clothes,
or cause the dryer to stop before your load is
completely
dry. The screen is probably
clogged
if lint falls off the screen.
Clean the lint screen with
a nylon brush every 6 months
or more frequently
if it becomes
clogged
due to a residue buildup.
To wash
1.
Roll lint off the screen with your fingers.
2.
Wet both sides of lint screen with
hot water.
3.
Wet a nylon [)rush with hot water and liquid
detergent.
Scrub lint screen with the brush to
remove
residue buildup.
4.
Rinse screen with
hot water.
5.
Thoroughly
dry lint screen with
a clean towel.
Replace screen in dryer.
To clean dryer
drum
1.
Make a paste with
powdered
laundry detergent
and very warm
water.
2.
Apply
paste to a soft cloth.
OR
Apply
a liquid,
nonflammable
household
cleaner
to the stained
area and rub with a soft
cloth until all excess dye is removed.
3.
Wipe
drum thoroughly
with
a damp cloth.
4.
Tumble
a load of clean cloths or towels
to dry drum.
NOTE: Garments
that contain
unstable
dyes, such as denim
blue jeans or brightly
colored
cotton
items, may discolor
the dryer interior.
These stains are not harmful
to your dryer and
will
not stain future loads of clothes.
Dry unstable
dye items inside out to avoid transfer of
dye.
From
Inside
the
Dryer
Cabinet
lint should
be removed
every 2 years, or more often,
depending
on dryer usage. Cleaning
should
be done by a qualified
person.
From the Exhaust Vent
I.int should be removed every 2 years, or more often, depending on dryer usage.
¸¸i¸2
a
•.........
{:
Vacation
care
Operate
your dryer only when you are at home.
If you will be on vacation
or not using your
dryer for an extended
period
of time, you should:
1.
Unplug
dryer or disconnect
power.
2.
Clean lint screen. See "Cleaning
the [.int Screen."
Moving
care
1.
Unplug
the power
supply
cord.
2.
Make sure leveling
legs are secure in dryer base.
3.
Use masking tape to secure dryer door.

Advertisement

loading