Download Print this page
Maytag 3405344 Installation Instructions Manual
Maytag 3405344 Installation Instructions Manual

Maytag 3405344 Installation Instructions Manual

Advertisement

Quick Links

Have questions about your dryer?
Check your
Use and Care Guide
for a toll-free
number
to call, or call your
dealer.
The dealer
is listed in the Yellow
Pages of your phone
directory
under
"Appliances
-
Household
-
Major
-
Service and Repair."
When
you call, you will need the dryer
model
number
and serial number.
Both numbers
are on the model/serial
rating
plate located
in the door
well
behind
the dryer
door and on front
of openinq.
Record the numbers
here for handy reference:
I -
Model No.
Serial No.
Moving dryer to a new location?
Check with
your gas supplier
or dealer
to confirm
that your
dryer
is equipped
with
the
correct
burner
for the particular
type of gas in your new home.
Burner
information
is
specified
on the model/serial
rating
plate.
Shut
off electrical
supply
.~
\
Shut off gas supply
valve
in
the gas
supply line.
Disconnect
gas fittings
from
dryer
and cap gas supply
line. Tape
end of dryer
gas
pipe.
Tape
door
to front
panel.
oard
before
moving
it across
the floor
to orevent
damaging
floor
covekng.
IMPORTANT:
Read and
save these
instructions.
Installer:
Leave
Installation
Instructions
with
homeowner.
Homeowner:
Keep
Installation
Instructions
for future
reference.
For best performance,
install
dryer
according
to Installation
Instructions.
Failure
to
complete
installation
as
instructed
could
void
warranty.
Save
Installation
mDryer
Instructions
for local
Set to operate on NATURAL GAS.
electrical
inspector's
use.
Part No. 3405344
Your safety
and the safety
of
others
is very
important.
We have provided many important
safety messages in this manual
You will be killed or seriously injured
and on vour aooliance. Always
if you don't follow instructions.
1 read and obey all safety
ges.
messal
m
This is the safety
Ifi t .
alert symbol. This
svmbol alerts you to
hazards that-can kill or h&t you
and others. All safety messages
will be preceded by the safety
alert symbol and the word
"DANGER" or "WARNING".
These words mean:
You cafe be killed or seriously injured
if YOU don't follow instructions.
-
All safety messages will identify the
hazard, tell you how to reduce the
chance of injury, and tell you what
can happen if the instructions are
not followed.

Advertisement

loading

Summary of Contents for Maytag 3405344

  • Page 1 Shut off electrical supply Save Installation Set to operate on NATURAL GAS. Instructions for local Part No. 3405344 electrical inspector’s use. Tape door Shut off gas supply valve to front supply line. the gas panel. Disconnect...
  • Page 2: What To Do If You Smell Gas

    1” or 1” hex- pliers head socket wrench (for putty knife adjusting dryer feet) tin snips (new vent installations) level safety glasses Part No. 3405344 Benton Harbor, Michigan 49022 Printed in U.S.A. 0 1997...
  • Page 3: Product Dimensions

    Product dimensions A grounded electrical outlet required within 4-l/2 feet for Dimensions shown with the power supply cord. feet extended 1” from bottom of dryer. Explosion Hazard Keep flammable materials and vapors, such as gasoline away from dryer. Place dryer at least 18 inches above the floor for a garage installation.
  • Page 4: Recommended Ground Method

    Recommended ground method For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong ground plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong ground-type wall receptacle,...
  • Page 5: Determine Vent Length

    Dura SafeTM venting products are recommended Mobile home installation and are available from your dealer. requirements Four-inch diameter vent must be used. Use a heavy metal vent. If codes permit, this appliance is suitable for mobile Do Not use plastic or metal home installations.
  • Page 6 installation steps for details. Check operation. Check tb dryer is I level. Install feet. SLIDE DRYER ONTO Install vent system. CARDBOARDOR HARDBOARD BEFORE MOVING ACROSS FLOOR TO PREVENT FLOOR JyY;;t DAMAGE. dryer. Remove and dispose of red cap. Connect gas supply to dryer.
  • Page 7 Dryer must be level to reduce noise and assure proper performance. Slide dryer onto cardboard or hardboard before moving across floor to prevent floor damage. Move dryer close to its permanent location. Leave enough room to connect exhaust vent. Remove Check levelness of dryer...