Download Print this page

Maytag 3395325 Installation Instructions

Hide thumbs
   

Advertisement

IMPORTANT:
Read and save
these instructions.
IMPORTANT:
Installer: Leave Installation Instructions
with the homeowner.
Homeowner:
Keep Installation Instructions
for future reference.
Save Installation Instructions for local
electrical inspector's use.
Gas Dryer
Installation Instructions
art No. 3395325 Rev. A
3-73

Advertisement

   Summary of Contents for Maytag 3395325

  • Page 1

    Gas Dryer Installation Instructions IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use. art No. 3395325 Rev. A 3-73...

  • Page 2

    Before you start... pen dryer door. For recessed or closet installation spacing, see back cover. Support: The floor must be able to support the appliance weight of 175 pounds. Level floor: Maximum floor slope under Fire Hazard dryer - 1 inch. For your safety the information in this Protection...

  • Page 3

    Electrical Exhaust requirements requirements The exhaust outlet is located at the bottom center back of the dryer. Fire/Health Hazard Electrical Shock Hazard Detailed space requirements can be found Do Not use non-metal, flexible duct. Electrical ground is required on this in the “Recessed and closet installation Do Not use metal duct smaller than...

  • Page 4

    Now start... with dryer in laundry area. 1 Take tape off front corners of dry Open dryer and remove the literature and parts packages. (If dryer has a drying rack it should be removed also.) Remove parts from the plastic packages. Line these up next to your tools so each part is there...

  • Page 5

    Both numbers are on the serial/rating plate located in the door well behind dryer door and on front of opening. front view Recessed Printed in U.S.A. Part No. 3395325 Rev. A Benton Harbor, Michigan 49022 01992...

Comments to this Manuals

Symbols: 0
Latest comments: