Maytag MER5870 User Manual page 7

¸i i iiiiiii iiiiii iiii
iiiii
iiiiii
COOK TIME/STOP TIME Pads Setting the Timer
Use to program the oven to start and stop automatically. Use to set and then signal the completion of a time period
1. Press BAKE or CONVECT BAKE (select models) pad. up to 99 hours and .59 minutes (99:59).
Press the appropriate number pads for desired temperature.
2. Press COOK TIME pad. Press the appropriate number
pads to enter cooking time in hours and minutes.
3. To delay tile start of cooking, press STOP TIME pad. Press
the appropriate number pads to enter the time you want the
oven to stop.
See page 17 for additional information.
CONTROL LOCK Pad
The timer can be used independently of any other oven
activity and can be set while another oven function is
operating.
OVEN.
TIlE TIMER DOES NOT CONTROL TIlE
1. Press TIMER pad.
,_ Tile indicator word TIMER will flash and '_0HR:00"
appears in the display.
2. Press tile appropriate number pads until tile desired
number of minutes or hours and minutes appear in tl_e
display.
The touch pads on the control can be locked to prevent un-
wanted use. They will not function when locked. The current
time of day will remain in the display when this f)ature is
activated.
Example: To set the Timer for 5 minutes, press the
TIMER pad and d_e number 5 pad. The control will
begin countdown after a four second delay.
If an oven function is currently being used, the controls cannot
be locked.
To set: Press CONTROL LOCK pad for :everal seconds. A
single beep will sound when control is locked.
If any pad is pressed when Control Lock 1,'activated, OFF will
appear in the display for 15 seconds.
To restore: Press and hold tile CONTROL LOCK pad f?_r
several seconds. Tile indicator word OFF will disappear.
Example: To set the Timer for _ hour and 30 minutes,
press the TIMER pad and the numbers 1,3,0 pads. Tile
control will begin countdown after a four second delay.
Setting the Clock
1. Press CLOCK pad.
_,Tile indicator word TIME will flash in the display.
2. Press the appropriate number pads until tl_e correct time of
day appears in the display.
When electrical power is supplied or after apower interruption,
the last clock time before power was interrupted will flash.
To recall the time of day when anod_er time function is
showing, press the CLOCK pad.
Clock time cannot be changed when the oven has been pro-
grammed for clock controlled cooking, self-clean or delayed
self-clean.
3. Tile last minute of the countdown will be displayed as
seconds.
4. At tile end of the time set, one king beep will sound and
"End" will appear in the display. To change the number
of timer reminder signals, see page 7.
To cancel:
1. Press and hold TIMER pad for several seconds. Tile
time of day will reappear.
OR
2. Press the TIMER pad and the "0" number pad. After a
slight delay the time of day will reappear.
NOT[T: Press#_g CANCEL pad to caducei the timer will
caducei ALL selected ove_,/imctio_s except the timer.