Maytag MER5870 User Manual page 20

Care
C|eanlng (continued)
5. When the cleanh_g time has been completed,
the indica-
6.
tot word CLEAN will mm off. The indicator word
LOCK will remain on until the oven has cooled (approx.
1 hour). When the oven has cooled, the indicator word 7.
LOCK will turn off" and the door will automatically
unlock.
®®®®@@@@@@®@®@®@®@®@®@®@®@®@®@®
When the oven begins to clean, tile CLEAN symbol
will light and DELAY will go off ill the display.
When the clean time has been completed, the indicator
word CLEAN will turn off. The indicator word LOCK
will remain on until the oven has cooled. When the oven
has cooled, the indicator word LOCK will turn off and
the door will automatically unlock.
LOCKISSTILL ENGAGED.
DOOR CANNOTBE
OPENED UNTILLOCKIS
NO LONGER D_PLAYED.
To Cancel Self-Clean Cycle:
,,_ Press CANCEL pad.
o IfLOCK is NOTdisplayed,open oven door. If'LOCK
is displayed, allow oven to cool. then open oven door.
NOTE: Depending on the length of time the oven had
been cleaning, it may take up to an hour for tile oven
to cool down. When the oven is cool. the door will
automatically unlock and call be opened.
................. If you wish to delay the start of cleaning:
1-3. Follow preceding steps 1-3.
4. Press the STOP TIME pad.
STOP TIME will flash ill the display and display will
show calculated stop time based on the current time of
day and the clean time previously entered.
8° Press the appropriate number pads to enter the time you
wish the oven to stop.
A stop time call only be accepted for later in the day.
EXAMPLE: If at 9:00 you set the oven to clean for
three hours, the calculated stop time would be '_12:00".
If you want the stop time to be 1:00, press tile number
pads °'l,0,0". Four seconds later, tile display will
show 1:00 and the indicator word DELAY.
After Serf-Cleaning
About one hour after the end of the clean cycle, the LOCK
indicator word will turn oJ]: At this point, the door can be
opened.
Some soil may leave a light gray, powdery ash which can
be removed with a damp cloth. If soil remains, it indicates
that the clean cycle was not long enough. The soil will be
removed during the next clean cycle.
If the oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and embossed rack
supports with a small amount of vegetable oil to restore
ease of movement.
A white discoloration may appear after cleaning if acid or
sugary foods were not wiped up before tile clean cycle.
This discoloration is normal and will NOT aff)ct perfor-
mance.
Fine lines may appear in the porcelain resulting from the
heating and cooling of the finish. This is normal and will not
affect performance.
NOTES...
The first few times the oven is cleaned, some smoke and
odor may be detected. This is normal and will lessen or
disappear with use. If the oven is heavily soiled, or if the
broiler pan was accidentally left in the oven, excessive
smoke and odor may occur.
As the oven heats and cools, you may hear sounds of
metal parts expanding and contracting. This is normal
and will not damage your appliance.
Slide-in and drop-in models feature a cooling fan
that automaticM|y turns on dm'ing the clean cycle
and will automatically turn off after the clean cycle
when the oven has cooled.
19