LG GR-L247ER Parts List And Instructions Manual page 5

HOW TO INSTALL REFRIGERATOR
1. Connection of Pipe Connector A and B.
1) Turn off main valve of water pipe.
2) Disconnect water tap from piping by loosening nuts.
3) Connect pipe connector A and B to piping after sealing
the pipe connector with sealing tapes.
4) Connect feed valve to pipe connector A.
5) If there is only one tap water pipe, connect pipe
connector A only and install feed pipe.
Caution : • Feed pipe should be connected to cold water
line. If it is connected to hot water line, trouble
may occur.
• Please check rubber packing when connecting
feed pipe.
Pipe Connector B
\
Valve
\
How to wind
Sealing Tapes.
Single Lever Type Faucet
(general)
General Type
Two Hands Type Faucet
Feed
Valve
Single Lever Type Faucet (one
hole, tech type and hand spray)
Feed
Valve
2. Water Supply
1) After the installation of feed water, plug the refrigerator
to the earthered well outlet, press the water dispenser
button for 2 - 3 minutes, and confirm that the water
comes Out.
2) Check leakage at connecfing part, then arrange water
tube and locate the refrigerator at its regular place if
them is no leaking.
Water Tube
Water Tube
-20-