LG GR-L247ER Parts List And Instructions Manual page 17

EXPLATION FOR MICOM CIRCUIT
1-2. Oscillation circuit
Oscillation circuit is a circuit with the purpose of generating basic time for clock occurrence for synchronization and time
calculation in relation with information transmissionlreception of inside elements of IC1 (MICOM) The OSC1 must always
use rated parts since if SPEC is changed, time calculated at the ICl may be changed or no operation is done.
<GR.L207ERA, GR-L247ERA> <GR-B207ERA, GR-B247ERA>
CST4.OO_IGWI ;I i
r-MosclE]
CST4.0OUGW : I J_ ;
r_ osclr_ I
L _Lt_ _1T'i
t R1030_
1M
3,[___._j
1-3. Reset circuit
The reset circuit is circuit allowing various parts such as RAM inside of MICOM (IC1) to initialize and the whole of function to
start from the initial status, when initial power is inp_ or when power is applied again to MICOM by a spontaneous power
failure. 'LOW' voltage is applied to the reset terminal of MICOM in the beginning of power supply for a constant time (10ms).
Reset terminal dudng general operation is 5V (No MICOM operates in failure of RESET IC).
<GR-L207ERA, GR-L247ERA> <GR-B207ERA, GR-B247ERA>
T
Icg IC7
_ 4.7K
3 29 1 3 29
CC1O CC8
CC9
2
CC9 f_104 f_7104
104 104
- 32 -