Floppy Drive - Dell Precision 490 Desktop User Manual

1 drive-panel tabs
2 drive panel
1 drive panel
2 drive-panel tabs
2. Align the drive panel tabs with the side-door hinges.
3. Rotate the drive panel toward the computer until it snaps into place on the drive panel.
4. Replace the front panel (see
5. Replace the computer cover (see
Floppy Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
NOTE: If you are adding a floppy drive to your tower computer, see
NOTE: If you are adding a floppy drive to your desktop computer, see
Replacing the Front Panel).
Replacing the Computer Cover).
Installing a Floppy Drive (Tower Computer).
Installing a Floppy Drive (Desktop Computer).