Rotating the Hard-Drive Carrier Back into the Computer
Replacing the Front Panel
Replacing the Computer Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
Rotating the Hard-Drive Carrier Back into the Computer
1. Grasp the handle on the hard-drive carrier and rotate the carrier back into the chassis until the metal tabs on each side of the carrier are seated,
securing the carrier.
1 rotatable hard-drive carrier
2 handle
3 card-retention mechanism
2. Pull up on the card retention mechanism to release it from the hard-drive carrier.