Extron electronics Video and Audio Line Drivers with  Gain and EquaLization CVEQ 100 Specifications
Extron electronics Video and Audio Line Drivers with  Gain and EquaLization CVEQ 100 Specifications

Extron electronics Video and Audio Line Drivers with Gain and EquaLization CVEQ 100 Specifications

Extron electronics line drivers specification sheet
Hide thumbs Also See for Video and Audio Line Drivers with Gain and EquaLization CVEQ 100:

Advertisement

Specifications — CVEQ 100, SVEQ 100

Video

Gain ............................................... Composite video and Y of S-video: -1 dB to +3 dB (x0.9 to x1.4), adjustable
Equalization .................................. 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable
Bandwidth (Y of S-video) ........... 185 MHz (-3 dB)
Output cable driving distance ... Up to 1000' (300 m) with Extron MHR cable
Video input
Number/signal type
CVEQ 100 .......................... 1 composite video
SVEQ 100 .......................... 1 S-video
Connectors
CVEQ 100 .......................... 1 female BNC
SVEQ 100 .......................... 2 female BNC
Nominal level ............................... 1 Vp-p for Y of S-video, and for composite video (including sync)
Minimum/maximum levels
CVEQ 100 .......................... 0.4 to 2.0 Vp-p with no offset at unity gain
SVEQ 100 .......................... For Y: 0.4 to 2.0 Vp-p with no offset at unity gain
Impedance .................................... 75 ohms
Return loss .................................... <-25 dB @ 0 to 5 MHz
DC offset (max. allowable) ......... 4.0 V
Input coupling .............................. AC
Video output
Number/signal type
CVEQ 100 .......................... 1 composite video
SVEQ 100 .......................... 1 S-video
Connectors
CVEQ 100 .......................... 1 female BNC
SVEQ 100 .......................... 2 female BNC
Nominal level ............................... 1 Vp-p for Y of S-video, and for composite video (including sync)
Minimum/maximum levels ...... 0.4 to 2.0 Vp-p (follows input)
Impedance .................................... 75 ohms
Return loss .................................... -30 dB @ 5 MHz
DC offset ....................................... ±5 mV with no input signal
Sync
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM

Audio

Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, +0.05 dB, -0.0 dB
THD + Noise ................................ 0.015% @ 1 kHz at nominal level
S/N ................................................ >100 dB at maximum output (unweighted)
Stereo channel separation .......... >80 dB @ 1 kHz
Output cable driving distance ... Up to 1000' (300 m) with Extron STP cable
1-2
CVEQ 100, SVEQ 100 Line Drivers • Specifications
C of S-video: 0dB to +10 dB (x1 to x3), adjustable
0.3 Vp-p for C of S-video
0.3 Vp-p for C of S-video
Floating: +0.1 to -0.6 V, depending on input signal content

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Video and Audio Line Drivers with Gain and EquaLization CVEQ 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Extron electronics Video and Audio Line Drivers with Gain and EquaLization CVEQ 100

  • Page 1 Specifications — CVEQ 100, SVEQ 100 Video Gain ... Composite video and Y of S-video: -1 dB to +3 dB (x0.9 to x1.4), adjustable Equalization ... 0 dB to +7 dB (x1 to x2) at 5 MHz, adjustable Bandwidth (Y of S-video) ... 185 MHz (-3 dB) Output cable driving distance ...
  • Page 2: Audio Input

    Audio input Number/signal type ... 1 stereo unbalanced Connectors ... 2 RCA female Impedance ... 20k ohms unbalanced, DC coupled Nominal level ... -10 dBV (316 mVrms) Maximum level ... +16 dBu (4.9 V), balanced at 1% THD+N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV Audio output Number/signal type ...

Table of Contents