Page 2
Precautions Safety Instructions • English Warning Power sources • This equipment should be operated only from the power source This symbol is intended to alert the user of important indicated on the product. This equipment is intended to be used with a main power operating and maintenance (servicing) instructions in system with a grounded (neutral) conductor.
About this Manual This manual contains information about the Extron 3G HD-SDI 101 cable equalizer, with instructions on how to mount and operate this unit. About the 3G HD-SDI 101 The Extron 3G HD-SDI 101 is a compact, economical cable...
Page 6
High quality signals — Signals at all rates are equalized to give optimum signal quality. In addition, signals at standard data rates 270 Mbps (SMPTE 259M), 1.485 Gbps (SMPTE 292M), and 2.97 Gbps (SMPTE 424M) are automatically recognized and re-clocked. 3G HD-SDI 101 • Introduction...
The small size of this extender allows it to be mounted on a tabletop, on a rack, or under furniture. The 3G HD-SDI 101 is designed be placed at the end of a long cable run and close to the display device.
Page 8
To rack mount the 3G HD-SDI 101, follow these directions: If necessary, remove rubber feet from the bottom of the unit. EighthRackVersaToolsShelf Secure the 3G HD-SDI 101 to the shelf with two 4-40 x 3/16" screws in opposite corners of the base (see figure 2-1, below).
The 3G HD-SDI 101 can be mounted under furniture using optional mounting kit MBU 125 (part # 70-077-01) as follows: 1. Attach the mounting brackets to the 3G HD-SDI 101 with the provided machine screws as shown in the figure below.
3G HD-SDI 101 input is 500' (150 m). For HD-SDI signals, the maximum length from the signal source to the 3G HD-SDI 101 input is 400' (120 m). The maximum signal transmission distance depends on signal resolution, the source, the display, and the quality of the cable.
Page 11
To operate the 3G HD-SDI 101 cable equalizer, follow these instructions: Mount the 3G HD-SDI 101 in a convenient location at the end of a long cable run and close to the display device. Connect the power supply (provided) to the equalizer, using the captive screw connector.
2.97 Gps, or bypassed for other rates Nominal level ........ 0.8 Vp-p Minimum/maximum levels..0.5 V to 1 Vp-p Impedence ........75 ohms Return loss........<-25 dB @ 100 MHz DC offset......... ±5 mV with input at 0 offset 3G HD-SDI 101 • Reference Material...
Page 13
Transit Association) Listings..........UL, CUL Compliances........CE, FCC Class A, VCCI, AS/NZS, ICES MTBF..........30,000 hours Warranty......... 3 years parts and labor All nominal levels are at ±10%. Specifications are subject to change without notice. 3G HD-SDI 101 • Reference Material...
MBB 100, Back of the Rack mounting kit 70-367-01 MBU 125, Under-desk mounting kit 70-077-01 RG6 BNC cable (various lengths) 26-383-xx RG59 Non-Plenum cable (various lengths) 22-145-xx RG59 Plenum cable (various lengths) 22-146-xx 3G HD-SDI 101 • Reference Material...
Page 15
In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.
Need help?
Do you have a question about the 3G HD-SDI 101 and is the answer not in the manual?
Questions and answers