Mitsubishi CS-27609 Owner's Manual page 95

selecting the source of the PIP image
_Important:
The Mitsubishi TV you have purchased has two-tuner PIP. If you
have only an ANT-A input connected, you can view one program on
the main picture and another channel from the same ANT input on
the PIP display without the use of a second external tuaer, such as
a VCR.
If you have a cable box on ANT-A, you will not be able to have both
the PIP and main pictures from ANT-A. The main picture must be
ANT-B and the PIP picture ANT-A (cable box).
G G _
Ej
i _L_ _i!
O Turn the PIP image on by
pressing the PIP btttton.
O To select the PIP i_put, press
the PIP INPUT button. Each
time you press the button, the
PIP input will seLe(:t the next
input from the inputs available:
• ANT-A, INPUT 1, INPUT 2
or INPUT 3,
You can select ikNT-B in
PIP, only when the main
input is from INPUT 1,
INPUT 2 or INPUT 3.
Ant A 023
ESPI',I
PIP A023
l
Each time you select a different
input, an on-screer: display will
appear for about five seconds.
The screen will display the
name of the input selected.
O You can also select the PIP
input source by first selecting
the source in the rrLain picture
and then pressing the ENTER/
EXCH button, l?rcssing this
button with the PIP displayed
exchanges the PIP picture for
the main picture.
DImportant: If you have a picture displayed from ANT-B on the main picture,
and the PIP source from ANT-A, the ENTER/EXCH b atton will no_
exchange the main picture for the PIP picture.
Using the Picture-in-Picture (PIP) Modes 93