Mitsubishi CS-27609 Owner's Manual page 49

Using the remote control to operate VCRs, cable
boxes and other components (cont.)
If you are using a Mitsubishi HTS-100 surround sound amplifier
enter code 30 to use the POWER, VOLUME, and MUTE buttons.
If you are using a Mitsubishi HTS-300 receiver enter code 31 to use
the POWER, CHANNEL, INPUT, VOLUME, ENTER, number (0--
9), INFO, MENU, CANCEL, AUDIO, VIDEO, ADJUST, and
MUTE buttons.
If you are using a Mitsubishi M-VR400 (code 35), M-VR600 (code
35), M-VR800 (code 38), or M-VR1000 (code 38), you can use the
POWER, VOLUME, number (0-9), and MUTE buttons to operate
the receiver. The ADJUST buttons will access the M-VRS00 and
M-VR1000 menus.
If you are using a Mitsubishi M-CD500 CD changer, you can use
the PLAY, PAUSE, STOP, FF, and REW buttons to operate the
changer.
Resetting the layer of your remote to the original factory
setting
Set the select switch on the remote to choose the layer you have
set the component to.
While holding in the POWER button on the remote control,
enter the code 00.
Release the POWER button.
Getting Started 47