Table of Contents
Advertisement
TV + VCR + antenna
or cable
with a cable
box
(cont.)
procedure
_>Important:
Important:
_' Important:
O
Connect
the incoming
cable to the ANT-A terminal
on the back
of the TV.
O
Connect
a coaxial cable from the CABLE LOOP-OUT
terminal[
on the back of the TV to the cable box IN terminal.
O
Connect
a second cable from the OUT terminal
on the cable box
to the ANTENNA
IN terminal
on the back of the VCR.
0
Connect
a third coaxial cable from the ANTENNA
OUT termi-
nal on the back of the VCR to the ANT-B terrainal
on the back
of the TV.
Connect
an RCA pin-type
video cable from the VIDEO OUT
terminal
on the back of the VCR to the VIDEO INPUT
termi-
nal on the back of the TV.
If you are connecting
a Super VHS (S-VHS) VCR, use an S-Video
cable instead
of an RCA pin-type
_rideo cable.
Connect
this S-Video
cable to the S-VIDEO
OUT terminal
on the VCR.
Connect
the
other
end of this cable to the S-VIDEO INPUT
terminal
on the
back of the TV.
O
Connect
a set of RCA pin-type
audio cable_,; to the AUDIO
OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable to ,mnnect the left (L)
channel.
Connect
the other ends of this cable to the AUDIO INPUT
terminals
on the back of the TV.
If your VCR is monaural
(non-stereo),
you only need to connect
a
single RCA pin-type
audio cable.
Connect
the cable to the audio
out terminal
of the VCR, then connect the other end to the left (L)
audio input
on the back of the TV.
If your VCR has a video channel
switch, set it to "OFF/AV".
See
your VCR owner's
guide for details.
34
Chapter
2: Connecting
Your TV
Hide quick links:
Advertisement
Table of Contents
