Mitsubishi CS-27609 Owner's Manual page 79

Customizing the A/V memory settings (cont.)
[] Audio Function
Standard
[] Listen to : Stereo
[] Bass
_ reNe
Balance
[] Surround : Simulate
[] Speaker : Off
[] Level Sound
O Press either the left or right
ADJUST button.
O The setting appears at the
bottom of' the screen.
While the setting is still on the
screen, use the ADJUST right]
left buttons to adjust it.
O The functions disappear from
the screen after a few seconds.
You cannot adjust a _anction if
it is not on the screen.
access with the AUDIO button
The AUDIO button changes the audio settings for the currently
seIected A/V memory category. The currently selected A/V
memory category will display on the screen above the audio adjust-
ment display when the Audio button is pressed. (See "Selecting the
A!V Memory Position" in this chapter.)
{]} Press the AUDIO button until
the desired function displays on
the bottom of the screen.
While the function is still on the
screen, use the ADJUST right/
left buttons to modify ffae
function"s setting.
The functions disappear from
the screen after a few seconds.
You cannot adjust a function if
it is not on the screen.
_Important: If you use the AUDIO button, any adjustments made to audio
functions are memorized into the currently selected A/V memory
position (Standard, Movie, Music, News, Sports). To re,_et the
audio functions to their factory settings, see "Selecting the AiV
Memory" in this chapter.
DImportant: Pressing the ADJUST right/left button alone in normal picture will
select the previous selected video or audio 5anction menu.
Getting Started 77