Table of Contents
Advertisement
TV + VCR + antenna
or cable
with
a cable
box
(cont.)
_
procedure
0
Connect
the cable system's
incoming
cable to the IN terminal
on the two-way
splitter.
O
Connect
a coaxial cable to one of the OUT terminals
on the
splitter;
connect
the other end of this cable to the _3qT-B
terminal
on the back of the TV.
Connect
a second cable to the other OUT terminal
on the
splitter;
connect
the other end of this cable to the IN terminal
on the cable box.
Connect
the third coaxial cable to the OUT terminal
on the
back of the cable box; connect the other end of this cable to the
ANT-A terminal
on the back of the TV.
Connect
the fourth coaxial cable from the CABLE LOOP-OUT
terminal
on the back of the TV to the ANTENNA
IN terminal
on the back of the VCR.
O
Connect
an RCA pin-type
video cable from the VII)EO OUT
terminal
on the back of the VCR to the \rIDEO
INPUT
termi-
nal on the back of the TV.
[:>Important:
If you are connecting
a Super VHS (S-_%IS) VCR, use an S-Video
cable instead
of an RCA pin-type
video cable.
Connec;
this S-Video
cable to the S-VIDEO
OUT terminal
on the VCR. Connect
the
other end of this cable to the S-VIDEO
INPUT
terminal
on the
back of the TV.
O
Connect
a set of RCA pin-type
audio cables to the AUDIO
OUT
terminals
on the back of the VCR. Use the red cable to connect
the right (R) channel
and the white cable to connect the left (L)
channel.
O
Connect
the other ends of this cable to the AUDIO INPUT
terminals
on the back of the TV.
Basic Connections
31
Hide quick links:
Advertisement
Table of Contents
