Mitsubishi CS-27609 Owner's Manual page 25

TV + antenna or cable without a cable box
equipment you will need
If you have a standard 75-ohm coaxial cable, you will not need
additional equipment. If your antenna has two leads (called twin
lead or 300 ohm antenna lead), you will need:
• One 300-75 ohm matching
transformer
connecting a cable
300 ohm - in
75 ohm .-out
• Connect the incoming cable or antenna to the tCST-A input
terminal on the TV.
300 Ohm Fiat
Twin Lead --4
75 Ohm
Coaxial Cable
0
0 0 __
/
Optional 300 Ohm to 75 Ohm
Matching Transformer
TV rear terminals
_l__W
@:t_° 2] .....
0;@ @ '
k_ _ _ _'_
;;-._:
connecting an antenna with twin leads
O Use a screwdriver to connect the 300 ohm twin leads to the
transformer.
Push the 75 ohm side of the transformer onto the ANT-A
terminal on the TV.
Basic Connections 23