Mitsubishi CS-27609 Owner's Manual page 28

TV + separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home with two
separate antennas you'll need to combine them in order to connect
them to the TV. To do this you w:ill need a UHFNHF combiner.
(There are different combiners for different kinds of wires. Check
with your local electronics store fi)r the kind o:_combiner you need.)
Pictured to the right is a
standard combiner with the
following specifications:
Two (2) 300 ohm inputs
One (1) 75 ohm output
_[_ 75 OHM Out
To connect separate UHF and VHF antennas to your TV:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
Press the combiner onto the ANT-A terminal on the rear of the
TV.
VHF Anlenna
(Channels 2-13)
-- Flat Twin Lead
External
Antenna
or Cabls
UHF Antenna
(Channels 14-69)
Flat Twin Lead --
_ 300 Ohm to
75 Ohm
Combiner
Back Side
TV Rear Terminal
26 Chapter 2: Connecting Your TV