Memory Card Care And Handling; Batteries; Lcdmonitor Care; Copyright - Konica Minolta DYNAX 5D Instruction Manual

Hide thumbs Also See for DYNAX 5D:
Table of Contents

Advertisement

OPERMING TEMPERATURES
AND CONDiTiONS
• This camera has been designed for use in temperatures
from 0°C to 40°C (32°F to 104°F).
• Never leave the camera exposed to extreme high temperatures,
such as in a car parked in the
sun, or to extreme humidity.
• When taking the camera from a cold to a warm environment,
place it in a sealed plastic bag to
prevent condensation
from forming. Allow the camera to come to room temperature
before
removing it from the bag.
MEMORY CARD CARE AND HANDLING
Memory Cards are manufactured with precision electronic components. Konica Minolta has no
responsibility for any loss or damage to data. it is recommended that a copy of the card data be
made. The following may cause data loss or damage:
• Improper use of the card.
• Bending, dropping,
or subjecting
the card to impact.
• Heat, moisture, and direct sunlight.
• Static electrical discharge
or electromagnetic
fields near the card.
• Removing the card or interrupting
the power supply while the camera or a computer
is accessing
the card (reading, writing, formatting,
etc.).
• Touching the electrical
contacts of the card with your fingers or metal objects.
• Using the card beyond its life. Purchasing a new card periodically
may be necessary.
• When using a Microdrive,
do not subject the camera to vibrations.
8MTERIES
• Battery performance
decreases with temperature,
in cold environments,
we recommend
keeping
spare batteries in a warm place, such as the inside of a coat. Batteries can recover their power
when they warm up.
• Do not store the battery when it is fully charged.
• When storing the battery for extended periods, recharge it for five minutes every six months. The
battery may not be able to be charged if completely
exhausted.
• A special built-in battery supplies power to the clock and memory when the camera is exhausted
or removed, if the camera resets each time the battery is removed, the battery is exhausted.
It
must be replaced at a Konica Minolta service facility.
• After initially inserting the battery, do not remove it for twelve hours; the camera can be off during
this period. The main battery is used to charge an internal battery, which protects settings when
the main battery is removed.
• Keep battery and camera charger contacts clean. Dirty contacts
can prevent charging. If the
contacts
become dirty, wipe them with a cotton swab.
LCDMONITOR CARE
• The LCD monitor
is manufactured
using high-precision
technology
and more than 99.99% of the
pixels operate properly. Less than 0.01% of the monitor pixels are displayed
as color or bright
points; this is not monitor defect and does not affect the recorded
image.
• Do not apply pressure to the surface of the LCD monitor; it may be permanently
damaged.
• In a cold environment,
the LCD monitor may become temporarily
dark. When the camera warms
up, the display will function
normally.
• if fingerprints
are on the LCD monitor surface, gently wipe with a soft, clean, dry cloth.
COPYRIGHT
• TV program, films, video tapes, photographs,
and other materials may be copyrighted.
Unauthorized
recording or duplication
of such material may be contrary to copyright
laws. Taking
pictures or images of performances,
exhibitions,
etc. is prohibited
without approval and can
infringe on copyright.
Images protected
by copyright
can only be used under the provisions within
the copyright
laws.
BEFORE iMPORTANT EVENTS 0R JOURNEYS
• Check the camera's operation; take test pictures and purchase spare batteries.
• Konica Minolta has no responsibility
for any damage or loss incurred by equipment
malfunction.
QUESTIONSAND SERVICE
• If you have questions about your camera or charger, contact your local camera dealer or write to
the Konica Minolta distributor in your area.
• Before shipping your camera or charger for repair, please contact a Konica Minolta service facility.

Advertisement

Table of Contents
loading

Table of Contents