Operating Temperatures And Conditions; Memory Card Care And Handling; Batteries - Konica Minolta MAXXUM 5D Instruction Manual

Konica minota digital camera instruction manual 5d
Hide thumbs Also See for MAXXUM 5D:
Table of Contents

Advertisement

OPERATING TEMPERATURES AND CONDITIONS

• This camera has been designed for use in temperatures from 0°C to 40°C (32°F to
104°F).
• Never leave the camera exposed to extreme high temperatures, such as in a car
parked in the sun, or to extreme humidity.
• When taking the camera from a cold to a warm environment, place it in a sealed plastic
bag to prevent condensation from forming. Allow the camera to come to room
temperature before removing it from the bag.

MEMORY CARD CARE AND HANDLING

Memory Cards are manufactured with precision electronic components. Konica Minolta
has no responsibility for any loss or damage to data. It is recommended that a copy of
the card data be made. The following may cause data loss or damage:
• Improper use of the card.
• Bending, dropping, or subjecting the card to impact.
• Heat, moisture, and direct sunlight.
• Static electrical discharge or electromagnetic fields near the card.
• Removing the card or interrupting the power supply while the camera or a computer is
accessing the card (reading, writing, formatting, etc.).
• Touching the electrical contacts of the card with your fingers or metal objects.
• Using the card beyond its life. Purchasing a new card periodically may be necessary.
• When using a Microdrive, do not subject the camera to vibrations.

BATTERIES

• Battery performance decreases with temperature. In cold environments, we
recommend keeping spare batteries in a warm place, such as the inside of a coat.
Batteries can recover their power when they warm up.
• Do not store the battery when it is fully charged.
• When storing the battery for extended periods, recharge it for five minutes every six
months. The battery may not be able to be charged if completely exhausted.
• A special built-in battery supplies power to the clock and memory when the camera is
exhausted or removed. If the camera resets each time the battery is removed, the
battery is exhausted. It must be replaced at a Konica Minolta service facility.
140
C
ARE AND STORAGE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynax 5d

Table of Contents