Table of Contents
Advertisement
NAViGATiNG THEPICTBBIDGE MENU
Pressing the menu button opens and closes the menu. The four-way
keys of the controller and the
control dials move the cursor in the menu. Pressing the central button of the controller enters a
setting. The options that can be changed vary with the printer.
Activate the menu with the menu button. Tab 1 at the top of the
menu is highlighted.
Use the left/right keys of the controller to highlight the
appropriate
menu tab; the menus change as the tabs are
highlighted.
O
se the up/down
key to scroll through the menu options.
Highlight the option whose
setting needs to be changed.
With the menu option highlighted,
press the right controller
key; the settings are
displayed
with the current setting highlighted.
If "StarV' is displayed,
press the center of
the controller to continue.
(_
up/down
key
highlight
new setting.
Use the
to
the
Press the central button of the controller to select the highlighted
setting.
Once a setting has been selected, the cursor returns to the menu options and the new setting is
displayed. To return to the PictBridge
screen, press the menu button. Read the following
sections
on information
on the menu options.
Index to menu functions
Batch print, 129
Data print, 131
DPOF print, 131
Index print, 129
Layout, 130
Paper size, 130
Print quality, 131
Batch print in section 1 selects all still images on the memory card for printing. Two options are
available:
All-frames
- to print all images on the card. A screen opens so the number of copies of each image
can be specified.
A total number of fifty images can be printed.
Reset - to cancel changes made with the batch print option or with the print selection screen.
_nde× print
An index print of all still images on the memory card can be made.
The quality and size of the print can be specified
with the camera
menu. The number of images per page varies with the printer. The
print-setup
confirmation
screen is displayed
before the print
routine starts.
Advertisement
Table of Contents
