Camera Body; Viewfinder; Getting Up And Running; Attaching And Removing A Lens - Konica Minolta DYNAX 5D Instruction Manual

Hide thumbs Also See for DYNAX 5D:
Table of Contents

Advertisement

GETTINGUP AND RUNNING
This section covers the preparation
of the camera. This includes the changing
of batteries, memory
cards, and lenses as well as the use of external power supplies.
ATTACHING AND REMOVING A LENS
This camera uses interchangeable
lenses. See page 110 for compatible
lenses. Never touch
the inside of the camera, especially the lens contacts and mirror. Do not leave the interior of
the camera exposed to dust or dirt. Replace the caps on the lens and attach the body cap
or another lens to the camera as soon as possible. Check the body cap or lens is free from
dust before mounting.
Remove the body cap from the camera and the rear cap from the
lens.
Align the red mounting index on the lens
and camera body. Carefully inser_ the
lens into the mount, then turn it
clockwise
until it clicks into the locked
position. Do not inser_ the lens at an
angle. If it does not fit, check its
orientation with the index marks. Never
force the lens.
Mounting indices
Press the lens release all the way in and turn the lens counter-
clockwise
until it stops. Carefully remove the lens.
ATTACHING THECAMERA STRAP
Always keep the camera strap around your neck in the event that you drop the camera.
1.
Pass the tip of the strap through the camera's strap eyelet from below. Attach the strap so the
tip comes between the strap and the camera.
2.
Thread the tip of the strap through the holder ring and the inside of the buckle and pull to
tighten. Leave some slack in the camera strap so the tip may be threaded through the buckle
easily.
3.
Push the holder ring toward the strap eyelet to secure the strap to the camera. Repeat with the
other end of the camera strap.
DIOPTER ADJUSTMENT
The viewfinder
has a built-in diopter that can be
adjusted
between -2.5 to +1.0. While looking
through the viewfinder, turn the diopter-
adjustment
dial until the viewfinder
focus frame
is sharp.
The optional Eyepiece Corrector
1000 series
diopters can be used if the adjustable viewfinder
diopter is not sufficient.

Advertisement

Table of Contents
loading

Table of Contents