Table of Contents
Advertisement
CONNECTING T OWINDOWS 98 / 98 SECOND EDiTiON
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be
installed manually with the operating
system's add-new-hardware
wizard; see the instructions
on
the following
page. During installation,
if the operating system requests the Windows
98 CD-ROM,
inset it into the CD-ROM drive and follow the accompanying
instructions
on the screen. No special
driver software
is required for other Windows
operating systems.
Automatic _nstaHatiol_
i
;i i ; ;,;}i
_i ii;
,}
iiiiiiiiih_
iiiiiiiiiiii_
iiiiii_
iiiiiiiiii!iii
Before connecting the camera to the
computer, place the Digital Camera
Software CD-ROM in the CD-ROM drive.
The Digital Camera Software installer
launcher opens. To automatically
install
the Windows
98 USB driver, click on the
"Install the Windows 98 USB mass-
storage driver" button. A window
appears
to confirm that the driver should be
installed; click "Yes" to continue.
When the driver has been successfully
installed, a window appears. Click "OK."
Restart the computer
before connecting
the camera (p. 115).
Manua_i[_staHation
To install the Windows
98 driver manually, follow the
instructions
in the connecting-the-camera-to-a-computer
section on page 115.
When the camera is plugged into the computer, the
operating system will detect the new device and the add-
new-hardware-wizard
window
opens. Place the Digital
Camera Software CD-ROM in the CD-ROM drive. Click
"Next."
Choose the recommended
search for a suitable driver.
Click "Next."
Choose to specify the location of the driver. The browse
window
can be used to indicate the driver location. The
driver should be located in the CD-ROM drive at
:\Win98\USB.
When the location is shown in the window,
click "Next."
Advertisement
Table of Contents
