Upper And Lower Oven Lights; Leveling Legs; Convenience O Utlet - Maytag Gemini MER6769BAQ User Manual

CARE & CLEAHIHG, com.
OVEN WINDOW(S)
TOPROTECT THEOVENDOOR WINDOW:
1. Donotuseabrasive cleaningagentssuch
as steelwoolscoudngpadsor powdered
cleaners as theymay scratchtheglass.
2. Donothit theglasswithpots,pans,furni-
ture,toys,or otherobjects.
3. Do notclosethe ovendoor untiltheoven
racksare in place.
Scratching, hitting,jarring o r stressing theglass
mayweaken itsstructure causing an increased
risk of breakage at a laterdate.
UPPER AND LOWER OVEN
LIGHTS
(SELECT MODELS)
Toassuretheproperreplacement bulbis
used,orderbulb fromMaytagCustomer
Service.Call1-800-688-8408, ask forpart
number 74004458.halogen bulb.
LOWEROVEN LIGHT
(SELECT MODELS)
LEVELING LEGS
Besuretheanti-tip bracketsecuresoneof
the rear levelinglegs to the floor. This
bracketprevents the rangefromacciden-
tally tipping•
Therangeshouldbeleveledwhen i_
installed.If the range is notlevel, _'1 _
plastfclevelinglegs, Io- U
turn the
catad at eachcomer of the J!_'_,
range, until range is _ _" " _
level. _ -J_
BRACKET
_L_EG
CONVENIENCE O UTLET
(CANADIAN MODELS ONLY)
Theconvenience outletislocated onthelower
left sideof the backguard.
Besureappliance cords donotreston or near
thesurfaceelement.If the surfaceelementis
turnedon,thecordandoutletwillbedamaged•
Theconvenience outletcircuit breaker m aytdp
if thesmallappliancepluggedintoit exceeds
10amps.Toreset t hecircuitbreaker, p ress the
switchlocatedon the loweredgeof theback-
guard.
TO REPLACE OVENUGHTBULB:
1.
2.
3.
4,
5.
Whenoven iscool, u sefingertips tograsp
edgeof bulbcover. Pulloutandremove.
Carefully remove old bulbby pulling
straight out ofceramic base.
Toavoiddamaging or decreasing thelife
ofthenewbulb,donottouchthebulbwith
barehandsorfingers.Holdwithaclothor
paper towel. Push new bulb prongs
straight i ntosmallholes ofceramic base.
Replacebulb cover by snappinginto
place.
Reconnectpowerto the range.Reset
clock.
E_JLB COVER
TOREPLACE OVENLIGHTBULB:
1. When ovenis cool,hold bulbcover in
place,thenslidewireretaineroff cover.
NOTE:Bulb coverwillfa]l if not heldin
place whileremoving wireretainer.
2. Remove bulb cover and light bulb.
3. Replace with a 40-wattappliance bulb.
4. Replacebulb coverandsecure withwire
retainer.
5. Reconnect p owerto range.Resetclock.
CIRCUIT BREAKER SWITCH
1S