COMMON INTERFACE :
Slot for a Conditional Access Module (CAM)
(see 'Use a Conditional Access Module' on page
31 ) .
Connect a computer
Before connecting a computer to the TV
•
Set the monitor refresh rate on your
computer to 60Hz.
•
Press
Picture format and change the
TV picture format to [Unscaled] .
Connect a computer with one of the following
connectors:
Note
•
Connections via DVI require an additional audio cable
to connect the shared AUDIO IN L/R connector to a
computer. Note that you cannot input audio from Y Pb
Pr (32/42") or VIDEO (22") when AUDIO IN L/R is
connected to a computer.
•
HDMI cable
•
DVI-HDMI cable
AUDIO
AUDIO
IN
IN
L
L
R
R
HDMI cable and HDMI-DVI adaptor
•
AUDIO
AUDIO
IN
IN
R
R
L
L
Assign the AUDIO IN L/R connector
If you connect audio from a computer to
the AUDIO IN L/R connector at the back
of the TV, you must associate it to the HDMI
connector.
1
Press MENU on the remote control
and select TV menu > Installation >
Connections > Audio In L/R.
2
Press
to enter the list.
3
Press
or
to select the HDMI
connector used by the PC.
4
Press MENU to exit.
Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
EN
31