Changing The Oven Light; Cooking Table - Kenmore ELITE 790.4907 Series Use & Care Manual

Built-in
Table of Contents

Advertisement

General Care & Cleaning
Lift backside .......
of glass shield
and remove it.
Halogen
LightBulb
Changing
the Oven Light
An interior oven light will turn on automatically
when the oven door is opened.
The oven light may be turned on when the door is closed by using the oven
light switch located on the control panel.
The lamp is covered with a glass shield. The glass shield can be removed to be
cleaned manually or to change oven light. THIS GLASS SHIELD MUST BE IN
PLACE WHENEVER THE OVEN IS IN USE.
To replace the light bulb:
CAUTION:
BE SURE THE OVEN IS COOL.
1.
Turn the power off at the main source.
2.
Wear a leather-faced
glove for protection against possible broken glass.
3.
To remove the glass shield,
pull the back side of the shield
toward the
inside of the oven in a manner to lift it up from the oven side.
4.
The glass shield should come out easily by pushing a little toward front of
the range.
5.
Replace halogen light appliance bulb taking care not to touch the bulb with
your bare fingers. Touching bulb with your skin can leave a film on the bulb
that causes it to burn out quickly.
6.
Replace glass shield in opposite order and manner of removal.
Cooking Table
_
CONVECTION BAKE pad
Food Type
Decrease in normal
cook time
Frozen foods, pies,
15-25 %
pastries and pizza
Ref rigerator cookies
15-35 %
Ref rige rator biscuits
15-30 %
Rolls & Breads
20-25%
Fresh Pies/Pastries
10-20 %
Begin with the maximum reduction in cook time
and adjust as needed.
*Recommended
reduction in cook time based on
brands of food items tested. Cook time may vary
with your specific brand of food item.
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

790.4907

Table of Contents