To Start the delayed
The FLEX CLEAN _(F_,
DELAY START dL.ATY_ pads and length of clean cycle, controls the Delayed Self-Clean operation.
The automatic timer will turn the oven on and off at the time you select in advance. Be sure to review TO START THE SELF-
CLEAN CYCLE for recommended
To set the control
for the Self=Cleaning
Cycle to start
at a delayed
time and shut off automatically
3 hour self-clean
cycle to start at 4:30)
Be sure the clock is set with the correct time of day and the
oven door is closed.
will flash and "3:00" HR will show in
the display (Figure 1). The control will automatically
clean for a
3 hour period (default self-cleaning
cycle time). Note: If a 2 or
4 hour clean time is desired, press (_
for 2 hour
or press @
for a 4 hour clean time. Set the
cleaning time based on the amount of soil--light,
heavy (*See previous page).
.The "DOOR LOCKED"
icon and the letters "CLn" will remain on in the
display (Figure 2).
Enter the desired start time using the number
The "CLn" icon will turn off; "DELAY", "DOOR
LOCKED" and "CLEAN" icons will remain on (Figure 4).
As soon as the control is set, the motor driven oven door lock
will begin to close automatically.
Once the door has been
locked the "DOOR LOCKED" indicator light will quit flashing
and remain on.
The control will start the self-cleaning at the set start time, for
the period of time previously selected. At that time, the icon
"DELAY" will go out; "CLn" and oven icon will appear in the
display (Figure 5).
Cycle is Completed
The time of day, the "DOOR LOCKED" and "CLEAN" icon will
remain in the display (Figure 6).
Once the oven has cooled down for approximately
and the "DOOR LOCKED"
icon is no longer displayed, the
oven door can then be opened (Figure 7).