Download  Print this page

Kenmore ELITE 790.4907 Series Use & Care Manual Page 11

Built-in.
Hide thumbs

Advertisement

Consumer
Defined Control
Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These
include the Oven Lockout, Temperature
Display and Silent Control Operation features
Setting
Oven Lockout
Feature
The _
pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents
v
the Oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
To activate
the Oven Lockout feature
t.
Press and hold _
for 3 seconds (Figure t
).
v
2.
After 3 seconds "LOC" will appear, a beep will sound and "DOOR
LOCKED" will flash in the display. Once the oven door is locked
the "DOOR LOCKED" indicator will stop flashing and remain on
along with the "LOC".
To reactivate
normal
oven operation:
t.
Press and hold _
for 3 seconds. A beep will sound. The
"DOOR LOCKED" will flash in the display until the oven door has
completely unlocked and "LOC" has cleared (figure 2).
PRESS
DISPLAY
for 3
seconds
Figure 1
for 3
seconds
Figure 2
2.
The wall oven is again fully operational.
.....
Setting
Silent
Control
Operation
:L_;
The DELAYTIME _
and FLEX CLEAN _
pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change control from normal
sound operation
to
silent control operation
1.
To tell if your range is set for normal or silent operation press and
hold _.
"0:00" will appear and "DELAY" will flash in the display
V
(Figure 3).
After 7 seconds ":SP" will appear in the display.
(Figure4)
2.
Press _
to switch between normal sound operation and
silent operation mode. The display will show either":SP" (Figure 4)
or ":=="(Figure 5).
If ":SP" appears (Figure 4), the control will operate with normal
sounds and beeps. If ":=="appears (Figure 5), the control is in the
silent operation mode.
3.
Press _A_
to accept the change or press @
to reject the
change.
for 7 seconds
Figure 3
Figure 4
11
Figure 5

Advertisement

Table of Contents

   Related Manuals for Kenmore ELITE 790.4907 Series

This manual is also suitable for:

790.4907

Comments to this Manuals

Symbols: 0
Latest comments: