Setting the Clock
Bake or 12 Hour Energy Saving
The KITCHEN TIMER _
and FLEX CLEAN _
pads control the Continuous Bake or 12 Hour Energy Saving features.
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left
on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.
To set the control for Continuous
Bake or 12 Hour Energy
Press and hold _
for 7 seconds (Figure1). After 7 seconds "12Hr" or
"- -Hr" will appear in the display and the control will beep once.
to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12H¢' (figure 2) in the display indicates
the control is set for the 12 Hour Energy Saving mode and "- -Hr"
indicates the control is set for the Continuous Bake feature (Figure 3).
to accept the change (Figure 4; display will return to time
day) or press _
to reject the change,
The KITCHEN TIMER
pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during
any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings.
To set the Kitchen
for 5 minutes)
"0:00" will appear and "TIMER" will flash in the display
Press the number pads to set the desired time in the display (example
The time will begin to count down with "5:00"
and "TIMER" will stay in the display (Figure 6). Note: if _
pressed the timer will return to the time of day after 25 seconds.
When the set time has run out, "End" and "TIMER" will show in the
display (Figure 7). The clock will sound with 3 beeps every 5 seconds
To cancel the Kitchen
Timer before the set time has run out
The display will return to the time of day.
To Set Add 1 Minute
The (,_,_,_ ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the (,,_,_,,) pad is pressed, 1 minute is
added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the
pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute. For further
information on how to set the Minute Timer feature see To Set the Minute Timer instructions above.