Connection Of Power Cords - NEC NF2300-SE41E User Manual

5.3

Connection of Power Cords

Be sure to use the power cords provided with the additional disk enclosure or
NEC-specified power cord.
The additional disk enclosure has the redundant power configuration to prevent the entire
unit from shutting down due to a single failure. Therefore, connect two power cords to
both power supplies of disk enclosure when operating the additional disk enclosure.
Connect the power cords in the following procedure.
(1) Check of power supply
Check that the power switch of the additional disk enclosure is set to OFF.
Do not concentrate power cords only to some AC outlets. If so, fire may
occur.
Do not connect the plug of a power cord to an AC outlet with a wet hand. If
so, you may be electrically shocked.
Do not put a heavy substance on a power cord. If so, the coating of the
power cord may be broken, fire may occur, and/or you may be electrically
shocked.
OFF
- 25 -
WARNING
ON