Administrative Settings - Nokia 5800 XpressMusic User Manual

Administrative settings

Select Menu Settings
>
settings.
To set the online time for the data call connection, select
call. The data call settings affect all access points that use a
GSM data call.
SIP settings
Select Menu Settings
>
settings SIP settings.
>
Session Initiation Protocol (SIP) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your service provider.
You can view, delete, or create these setting profiles in SIP
settings.
Access point name control
Select Menu Settings
>
settings APN control.
>
With the access point name control service, you can restrict
packet data connections and allow your device to use only
certain packet data access points.
This setting is only available if your SIM card supports the
access point control service.
To turn the control service on or off, or to change the allowed
access points, select Options
© 2011 Nokia. All rights reserved.
and Connectivity Admin.
>
and Connectivity Admin.
>
and Connectivity Admin.
>
and the corresponding option.
To change the options, you need your PIN2 code. Contact your
service provider for the code.
Packet data settings
Data
Select Menu
>
settings Packet
>
The packet data settings affect all access points using a
packet data connection.
Select from the following:
Packet data connection
●
and you are in a network that supports packet data, the
device registers to the packet data network. Starting an
active packet data connection (for example, to send and
receive e-mail) is quicker than if the device establishes a
packet data connection when needed. If there is no packet
data coverage, the device periodically tries to establish a
packet data connection. If you select
device uses a packet data connection only if you start an
application or action that needs it.
Access point
●
your device as a packet data modem to a compatible
computer.
High speed packet access
●
of HSDPA (network service) in UMTS networks.
Settings and Connectivity
data.
— If you select
When
— The access point name is needed to use
— Enable or disable the use
Connectivity
Admin.
>
When available
needed, the
79