Nokia 5800 XpressMusic User Manual page 101

when you are deleting several items at the same time, delete
items one by one, beginning with the smallest items.
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number, address,
or e-mail address. Select
contact, and edit the contact card.
Q: How can I end the data connection when the
device starts a data connection again and again?
A: The device may be trying to retrieve a multimedia message
from the multimedia message centre. To stop the device from
making a data connection, select
Options Settings
> >
Multimedia retrieval. Select
multimedia messaging centre save messages to be retrieved
later, or Off to ignore all incoming multimedia messages. If
you select Manual, you receive a notification when you have
a new message in the multimedia message centre. If you
select Off, the device does not make any network connections
related to multimedia messaging. To set the device to use a
packet data connection only if you start an application or
action that needs it, select
Connectivity Admin. settings
>
data connection When
>
switch the device off and then on again.
© 2011 Nokia. All rights reserved.
Menu Contacts and the relevant
>
Menu Messaging
>
Multimedia message
>
Manual to have the
Menu Settings and
>
Packet data
>
needed. If this does not help,
Q: Can I use my Nokia device as a fax modem with
a compatible PC?
A: You cannot use your device as a fax modem. However, with
call diverting (network service), you can divert incoming fax
calls to a fax number.
Q: How do I calibrate the screen?
A: The screen is calibrated at the factory. If it is necessary to
recalibrate the screen, select
Touch input
instructions.
Q: Why do I get the error message Expired
and
certificate or Certificate not valid yet when I am
installing a downloaded application?
A: If Expired certificate
displayed, even if the certificate should be valid, check that
the current date and time in your device are correct. You may
have skipped the setting of date and time when starting the
device for the first time, or the mobile network may have
failed to update these settings to your device. To resolve this,
select Menu
Factory settings. Restore the factory settings, and when the
Packet
>
device restarts, set the correct date and time.
Menu
>
Touch screen calibration. Follow the
>
or Certificate not valid yet
Settings and Phone
>
Troubleshooting
Settings and Phone
>
is
Phone mgmt.
> >
101