Nokia 5800 XpressMusic User Manual page 73

Wireless LAN (WLAN) access point
Manage access point groups
To avoid selecting a single access point every time the device
makes a network connection, you can create a group that
contains various access points to connect to that network and
define the order in which the access points are used. For
example, you can add wireless LAN (WLAN) and packet data
access points to an internet access point group, and use the
group for browsing the web. If you give WLAN the highest
priority, the device connects to the internet through WLAN,
if available, and through a packet data connection if not.
Select Menu Settings
>
Destinations.
Create a new access point group — Select
Manage New destination.
>
Add access points to an access point group — Select the
group and Options New access
>
Copy an existing access point from another group —
Select the group, go to the access point to copy, and select
Options Organise
> >
Change the priority of an access point within a group —
Select Options Organise
>
Packet data access point settings
Select Menu Settings
>
Destinations Access
>
© 2011 Nokia. All rights reserved.
and Connectivity
>
Options
point.
Copy to other dest..
Change priority.
>
and Connectivity
>
point, and follow the instructions.
Edit a packet data access point — Select an access point
group and access point marked with
instructions from your service provider.
Select from the following:
Access point name
●
by your service provider.
User name
●
data connection, and is usually provided by your service
provider.
Prompt password
●
every time you log in to a server, or if you do not want to
save your password in the device, select Yes.
Password — A password may be needed to make a data
●
connection, and is usually provided by your service
provider.
>
Authentication
●
encrypted, select Secure. To send your password
encrypted when possible, select Normal.
Homepage
●
setting up, enter the web address or the address of the
multimedia message centre.
Use access point
●
destination using this access point after confirmation or
automatically.
Modify advanced packet data access point settings —
Select Options
Select from the following:
— The access point name is provided
— The user name may be needed to make a
— If you must enter the password
— To always send your password
— Depending on the access point you are
— Set the device to connect to the
Advanced settings.
>
Connectivity
. Follow the
73